Canon Printer iP2770 Paper Jump (3x Blinking)

Causes of Canon iP2770 Printer Paper Jump (3x Blinking)

For the case of the Canon iP2770 printer or Canon printer with other models often we get into trouble like "Paper Jump", visible indicators on the Power light is green and the lights stop / resume blinking 3x ....

What should you do?

Of course at that moment must have us confused and did not know what to do ... because once we press the reset button was no change and the lights stop / resume back blinking 3x ....

if that happens, you do not panic once and do not need to reparation costs handyman service that is expensive and this is a way to reduce costs and spending our money, calm heart and mind to relax, look at the problem, then prepare the equipment :

• Screwdriver
• Heating tin
• Lead
• Suction tin

Then unloading casing Canon iP2770 printer as shown below, after we dismantle observe all inside ...

In the area that I circled in red, there are three sections named ASF (Paper Sensor) therein which make our printers circumstances typically characterized by 3x blinking orange color on the button to stop / resume, and green colors illuminate the power button.


Usually on the third part is often the case that the problem is caused by the sensor that has been weak because the use is too often and also due to the long life of the printer, for cases like this often happens weak is between No. 1 and No. 2 ... 

How to Handle?

Remove the sensor no 1 and then remove and replace with sensors that new ways off old sensor using soldering and suction with a suction tin, then plug the sensor and then soldered again, and put the place sensors on the No. 1, if after power is still blingking 3x we headed to the replacement of the sensor No. 2 the same way with no one had after completion turn on the printer again, and if still happens blinking 3x, we do the replacement for sensor No. 3 the same way with the replacement of the No. 1 and No. 2 earlier after the restart must have completed the problem ... !!!


if you do not have sperpart sensor and do not want your hard-earned for the installation of us can afford to shop sperpart printer for ASF (paper sensor) Canon series ip 2770 usually for sensor is the same shape and style for the type of series canon other printer and we stay put, easy not ?.....


Hopefully this article useful to you all who are experiencing problems like this. Also read about Epson Printer T13 and L100 - None Attractive Paper - Paper out or not loaded Correctly

• Tweet
• Share
• Share
• Share
• Share