Canon Printer iP2770 Paper Jump (3x Blinking)

Causes of Canon iP2770 Printer Paper Jump (3x Blinking)

For the case of the Canon iP2770 printer or Canon printer with other models often we get into trouble like "Paper Jump", visible indicators on the Power light is green and the lights stop / resume blinking 3x ....

What should you do?

Of course at that moment must have us confused and did not know what to do ... because once we press the reset button was no change and the lights stop / resume back blinking 3x ....

if that happens, you do not panic once and do not need to reparation costs handyman service that is expensive and this is a way to reduce costs and spending our money, calm heart and mind to relax, look at the problem, then prepare the equipment :

• Screwdriver
• Heating tin
• Lead
• Suction tin

Then unloading casing Canon iP2770 printer as shown below, after we dismantle observe all inside ...

In the area that I circled in red, there are three sections named ASF (Paper Sensor) therein which make our printers circumstances typically characterized by 3x blinking orange color on the button to stop / resume, and green colors illuminate the power button.


Usually on the third part is often the case that the problem is caused by the sensor that has been weak because the use is too often and also due to the long life of the printer, for cases like this often happens weak is between No. 1 and No. 2 ... 

How to Handle?

Remove the sensor no 1 and then remove and replace with sensors that new ways off old sensor using soldering and suction with a suction tin, then plug the sensor and then soldered again, and put the place sensors on the No. 1, if after power is still blingking 3x we headed to the replacement of the sensor No. 2 the same way with no one had after completion turn on the printer again, and if still happens blinking 3x, we do the replacement for sensor No. 3 the same way with the replacement of the No. 1 and No. 2 earlier after the restart must have completed the problem ... !!!


if you do not have sperpart sensor and do not want your hard-earned for the installation of us can afford to shop sperpart printer for ASF (paper sensor) Canon series ip 2770 usually for sensor is the same shape and style for the type of series canon other printer and we stay put, easy not ?.....


Hopefully this article useful to you all who are experiencing problems like this. Also read about Epson Printer T13 and L100 - None Attractive Paper - Paper out or not loaded Correctly

Read more → Canon Printer iP2770 Paper Jump (3x Blinking)

Epson Printer T13 & L100 - None Attractive Paper - Paper out or not loaded Correctly

Printer Epson  T13 & L100 - None Attractive Paper - Paper out or not loaded Correctly

Okay, maybe you all have experienced about the printer that can not pull the paper and on the screen there is the inscription Paper out or not loaded Correctly out or not loaded Correctly

" and you may often Googling and searching for the problem, and may you all have a lot to read his article, and now I review back to friends who do not understand, as shown below.

I write this article because there are friends who happened yesterday complained that the Printer Paper  is damaged and said the damage could not be withdrawn, kept me wondering how many years the life of the printer? its been 3 years ... !! ........ owh clear old age !!!

and the reason why I want to share the experience, it is often are conducive in some Epson printers such as the T13, L100 and the other because the two printers is what I've handled and the case was the same ....

Why None Attractive Paper?

it happened because of the age factor printer is old and well worn continuously that lead to all parts inside the printer it becomes thirsty, and cases like this does not have to first be brought to a handyman service first ask for your closest friends, or try searching on "Paper out or not loaded Correctly" many once a case on the printer, and we must have the courage to try to brain-tweaking themselves and dismantle themselves.

First :
unloading once the casing, behind the casing there are two bolts only that opened then dislodged slowly casing there are only a few locks alone and slowly to open it can use a screwdriver min and the result is this part that later we take and improved, as shown below:

In the red circle that I mark that is what we are unloading, this is part of the paper drawer for the type Epson T13 series.
 
Second :
After we separated parts of the results are as shown below

In the picture above I marked in red appears once that happens the wear on the shaft pull the paper, and looked loose, and this is where the required accuracy us to solve a problem, the shaft loose it we can replace with sperpat new, but because the place I this is far from a town or place selling sperpat printer so I took the initiative to block the plate with the zinc thin and adjusted by loosening, or can also find zinc round or else live on our own that can work around, but this time I use a plate zinc easy to find, and the results are as shown below:

See the picture above I marked red circle, it is my prop use plas zinc, after which we put back and the results can be tested for sure the printer back can pull the paper, watch the roller Rubber his paper also when looked to have refined you can turn it over so that the time pull the paper can be smoothly.

And note also that all electronic equipment that is old will definitely only  once there is a problem of damage, therefore we must take care so that durable and lasting, as we clean of dust, every how many months we dismantle give lubricant so smooth performance, electronic equipment it can be compared as ourselves that is old already reduced performance and strength, and we must always maintain the health of our bodies are getting older advancing age, as well as other electronic equipment need be maintained his health as well. 

Hopefully I can be useful information for you all and tips to keep the equipment should not be forgotten as well. I say thank you for visiting this blog.When this article useful please shared .....also read Causes of Canon iP2770 Printer Paper Jump (3x Blinking)

Read more → Epson Printer T13 & L100 - None Attractive Paper - Paper out or not loaded Correctly